[wrfems] WRF BUFR/BUFKIT to display on D2D

[Tony Freeman]

All,

The "*parm" file that Douglas sent for me to try seems to have done the
trick.  I've re-attached it here for others to use.  Thanks Doug!

-- Tony


On Mon, Apr 23, 2012 at 9:04 AM, Douglas Tilly <douglas.tilly at noaa.gov>wrote:

>  Tony,
>
> I should have sent this the first time.  I've attached my
> wrfpost_cntrl.parm file that I use.  I got it originally from someone else
> (can't remember who) and have added/subtracted from there.  I do have some
> stuff that really isn't needed for AWIPS since I use this domain to run
> another WRF domain.
>
> Anyway, since you were getting data into your AWIPS with a previous build
> of the WRF, this is my guess.  However, this assumes that you're able to
> plot other data in D2D as well.  If you're not able to do that either, then
> it's possible/likely that there was some change that you made to your
> domain so that none of the data will display/decode properly in AWIPS.
>
> Please let me know how it goes.
> Doug
>
>
> On 4/21/2012 2:10 PM, Tony Freeman wrote:
>
> Thanks Brandt,
>
>  I do have WRF ingesting and displaying in AWIPS and GFE ... however the
> volumn browser will not display wrf soundings.
>
>  I've recently been told that the previous version of the WRF (a
> generation or two old) displayed soundings; but when trying to bring that
> item up in the new version nothing is happening.  One other office
> confirmed that the soundings are not being displayed, so we're hoping
> someone may have an idea of what the issues is and how to fix it.
>
>  -- Tony
>
>
> On Sat, Apr 21, 2012 at 1:10 PM, Brandt Maxwell <brandt.maxwell at noaa.gov>wrote:
>
>> Tony,
>>
>> One can display model soundings (including those from the WRF EMS) using
>> the volume browser in D2D (is this what you were looking for?).  No bufkit
>> files are required for this (just the normal grib files being sent to AWIPS
>> and processed).
>>
>> If you're not yet getting WRF output into AWIPS, you can use this page
>> for instructions:
>>
>>
>> http://strc.comet.ucar.edu/software/newrems/userguide/emsguide_appendixD.pdf
>>
>> Later...
>> Brandt/San Diego
>>
>>
>>  On Fri, Apr 20, 2012 at 6:03 AM, Tony Freeman <tony.freeman at noaa.gov>wrote:
>>
>>>  Hello,
>>>
>>>  What do I need to do to get WRF soundings to display on D2D?
>>>
>>>  I know I can create bufkit files to display on a PC using the bufkit
>>> program; however, I've been asked to somehow get that data to display on
>>> D2D instead.  Has anyone had success in doing this?  Would there happen to
>>> be instruction for this task anywhere?
>>>
>>>  -- Tony
>>>
>>>
>>>
>>>  _______________________________________________
>>> wrfems mailing list
>>> wrfems at comet.ucar.edu
>>>
>>>
>>
>
>
>  --
>
>  ============================
> *Tony Freeman*
> Information Technology Officer
> National Weather Service, SRHQ
> 819 Taylor Street, Room 10A24
> Fort Worth, TX 76102-6171
> Voice: 817-978-7777 x 306
> ============================
>
>
>
>
> _______________________________________________
> wrfems mailing listwrfems at comet.ucar.edu
>
>


-- 

============================
*Tony Freeman*
Information Technology Officer
National Weather Service, SRHQ
819 Taylor Street, Room 10A24
Fort Worth, TX 76102-6171
Voice: 817-978-7777 x 306
============================
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.comet.ucar.edu/pipermail/wrfems/attachments/20120424/6200731e/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: wrfpost_cntrl.parm
Type: application/octet-stream
Size: 34896 bytes
Desc: not available
URL: <https://mailman.comet.ucar.edu/pipermail/wrfems/attachments/20120424/6200731e/attachment-0001.obj>